TECNARE SW-218EB

Description

• The SW-218EB is a high performance loudspeaker defined by its exceptional headroom and an Extended frequency response.
• The SW218EB housing two linear, high-excursion 18-inch cone drivers mounted in a vented cabinet and optimally tuned port with flared ends to reduce turbulence and noise under high drive conditions.
• The loudspeaker’s 28Hz to 100Hz operating frequency range allow it to integrate with any Tecnare Loudspeaker System.
• When the SW218EB operate in infrasub mode others Tecnare subwoofers can be used to extend up the frequency response.
• The optional rigging kit (factory-installed option) allow the loudspeaker to be flown. Rigging system allow accomodate reversed units for flown cardioid array.
• To guarantee optimum performance, the SW218EB should be used in combination with T20-44 amplifier.
• The T20-44 provide power as well as advanced crossover function and the limiting ensures maximum driver protection, minimizing power compression while yielding high constant output under high continuous and peak power conditions.
• A different preset library is offer from the most of application even standard or cardioid configuration.
• Three low-pass filter are available.
• This exceptional features, coupled with big headroom and optimized rigging options, makes the SW-218EB a flexible tool for low-end directional applications for large-scale tours and installations.
• The subwoofer cabinet is constructed of first grade birch plywood and has an high-quality Polyurea paint finish.
• The front of the subwoofer is protected by a hex-stanmped, steel grille backed by an acoustically transparent foam.
• Two ground runners to protect the botton allow stacking the subwoofer in horizontal and vertical position.
• The subwoofer shall be connected via one 4-point speakON.

Engineering Specifications
– Frequency Response : 28 Hz – 100 Hz ±3dB, measured on axys
– Components : Low 2×18” LF driver
– Nominal Dispersion : Standard or Cardioid
– Impedance : 4 Ohm
– Axial Sensitivity : 103 dB (1w/1m)
– Calculated SPL : 137 dB continuous /143 dB peak (T-20 Amplifier)
– Power Handling : 3400 W AES / 6800 W continuos
– Dimmensions (HxWxD) (millimeters/inches) : 546x1340x700 mm . 22.10″ x 52.75″ x 27.56″
– Net Weight (kg/Pounds) : 90 kg . 198,41 lbs
– Construction : 18mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. Two recessed carrying handle.
– Grille : Powder coated perforated steel.
• Application information is presented for guidance only.
• Exel Acoustics SL reserves the right to make any necessary changes to the products and the published specifications.
• As part of the ongoing development program Exel Acoustics SL tries to maintain the highest degree of product compatibility.

Options
Colors Versions
• White color
• Black color
– 100 mm rotating wheels
– FUN-218EB Protective transit soft covers for one SW218V
– Rigging Kit
– THV-SW218EB Top Grid